iSecure GTOUR – Guarding Tour System
iSecure GTOUR is the newest guard tour system, 125kHz EM ID tag based on RFID technology. It provides Pogo pin contacts and Mini usb port two styles to customer for more choice, whole body was covered with rugged rubber that enhanced its anti crash performance.
PTZ Keyboard with Joystick Controller
This is a keyboard with 3-axis joystick that will allow a user to setup and control the pan, tilt, zoom, focus, iris and preset operation of the CCTV camera. Supports different protocol such as Pelco-D and Pelco-P. Serial Communication is enabled via RS-485. It can controls up to 100 CCTV cameras and communication distance of 1200m long.
iSecure CCTT04 CCTV Tester
iSecure CCTT04 is compatible with AHD TVI Analog High Definition and Regular Analog CCTV Cameras, Video and PTZ Control. Data Analysis, UTP Cable Test, Searing address, Color-bar generator. Resolution 1080* 240 Compatible AHD (720p, 960p ,1080p), also support AHD coaxial signals.
6 Outlet Power Strip
This is a Surge Protector IDEAL FOR TURNING ONE OUTLET INTO SIX TEMPORARY OUTLETS, HANDY, EASY TO MOUNT STRIP UNDER CABINETS, WALLS OR FOR DESK MOUNTING, ATTACTIVE COLOR COORDINATES PERFECTLY WITH APPLIANCES AND HOME DECOR
Mini Microphone
A high sensitive mini CCTV microphone ideal for both general and covert applications. Uses standard 2.1mm 12v DC input and RCA for audio input. It has built-in pre amplifier for better audio quality and outstanding interference rejection for better audio output.
iSecure EXTPOE
Isecure EXTPOE is an External Poe (For use with iSecure PoE optional Camera).
iSecure VBALUN – Passive Video Tranceiver
iSecure Passive Video Balun is a passive (non-amplified) device that allows the transmission of real-time CCTV video signal via twisted pair cable that can run up to 1000ft in full motion color video signal. It uses mini-coax pigtail lead for quick mounting onto CCTV cameras and a push-pin terminal for tool-less connection of twisted pair cable output.
iSecure BALUN1 UTP Power Injector for Coaxial
iSecure UTP Power Injector for Coaxial. It is an eletrical device that uses an Unshielded Twisted Pair cable (UTP), such as CAT5e, to transmit full motion camera video signal in color up to 300m / 1000ft.
iSecure 16CHPS Centralized Power Supply
iSecure 16CHPS is an 16ch centralized power supply .The power supply will operate over the entire input voltage range (100~240Vac). The input frequency range will be 50 to 60(HZ).
iSecure 18CHPS Centralized Power Supply
iSecure 18CHPS is an 18ch centralized power supply with an input voltage that can be selected to AC 100V~120V and AC 220V~240V, output current of 20A, output power of 240W and dimensions of 320(L) x 210(W) x 65(H) in mm.
iSecure SP1TO4 – 1 to 4 Splitter
iSecure SP1TO4 power adapter splits 1 power signal into 4 and is useful for powering multiple cameras from one central adapter
iSecure SP1TO8 – 1 to 8 Splitter
iSecure SP1TO8 power adapter splits 1 power signal into 8 and is useful for powering multiple cameras from one central adapter.
iSecure RJ45 Jack
iSecure RJ45 Jack is used to terminate Unshielded Twisted Pair (UTP) Cable. These connectors are commonly used for ethernet over TP..
iSecure DCCONM – DC Connector – Male
iSecure DCCONM is used for supplying direct current power. It is easy to install, no electrical tap, no crimping, no splicing but only a small screw driver. Its Plug external diameter is 5.5mm, internal diameter of 2.1mm and with screw tighten wire connection.
iSecure DCCONF – DC Connector – Female
iSecure DCCONF is used for supplying direct current power. It is easy to install, no electrical tap, no crimping, no splicing but only a small screw driver. Compatible for iSecure DCONM and with screw tighten wire connection.
iSecure BNC RG 59 Barrel – to connect coaxial cable
iSecure Barrel A 75 Ohm BNC female to BNC female coupler that will allow to connect two BNC Coaxial cable to each other.
iSecure RG6-59
iSecure RG6-59 BNC male connector.
