iSecure POES16 Poe Switch

iSecure POES16 is 16+4 ports Standard POE switch provides power and data to wireless access point and IP camera, using Power over Ethernet(PoE) over a single Cat-5 cable. The 16 Ethernet ports can be used for any 10/100 Mbps link and also can supply industry-standard IEEE 802.3af power. Advanced Auto detection gives power only to 802.3af powered devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the standard automatically determines PoE requirements, speed, duplex, and cable type using Auto detection.

SKU: POES16 Category:

Description

POE

POE PORT: 1-16
POE Standard: IEEE802.3AF IEEE802.3AT
POE power pin: Endspan: 1/2(+) 3/6 (-)
POE power: 30w(at), 15.4w(af)

RJ45

Rj45 port:1-16
Speed: 1-16 10M/100M 17-20 10M/100M
Manage parameter

Manage parameter: IEEE 802.1Q VLAN
IEEE 802.1p
QoS
802.3ad trunk
802.1D
RFC1157 SNMP v1
RFC1213 MIB II
RFC 1643 Ethernet Interface MIB
RFC 1493 Bridge MIB
DHCP client

PERFORMANCE PARAMETER

Backplane bandwidth: 4.0G
network delay: <20 ms
Packet forwarding rate: 6.5Mpps
The packet buffer memory: 256KB
The address database size: 8000
The mean time to failure: 5 years

NETWORK PROTOCOL

network protocol: IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
IEEE 802.3ab 1000BASET
IEEE 802.3z 1000BASEX
POE standard:IEEE802.3AF IEEE802.3AT

POWER SUPPORT

power supply: 48-55VDC 300w
Characteristics: Buit in PFC

SIZE

Long*wide*high: 440*290*45mm
Weight: 3.5kg

ENVIRONMENTAL SPECIFICATION

operation temperature: -20° -70°C( 32° 104° F)
Storage temperature: -40° -85°C (14° 158° F)
Operating humidity: 10% 90%, no condensation
Operating height: 3000 meters above sea level (10000ft)
Radiation and Safety Radiation: CE mark,commercial
FCC Part 15 Class A
EN 55022 (CISPR 22),Class A
Safety: CE/LVD EN60950